From the most recognized manufacturers in industry to show stoppers in arenas, night clubs and theatres, the CM Lodestar is the brand that more workers trust. For 50 years, the CM Lodestar has tackled the toughest jobs in the most stringent manufacturing environments around the globe. In entertainment, many of today’s top performers rely on the inverted CM Lodestar or “Chain Motor” to delicately position lighting, scenery, and sound equipment. Next time you’re hard at work in a manufacturing facility or relaxing at a rock concert or play—look up! Chances are a CM Lodestar is in place handling lifting and positioning needs. It’s been that way for 50 years. With its reputation for durability, reliability, and low maintenance, the same hoist may still be there a half-century from now.

These hoists feature the following:

• Disc type electric hoist brake.
• Solid state starting switch.
• Heavy-duty hoist motor with regenerative braking.
• Machined alloy steel heat treated lift wheel.
• Lifetime lubricated machined and heat treated gears.
• No oil in the gear case—NO oil leakage! Gear train lifetime lubricated with non-oxidizing grease.
• Precision machined and hardened pocket wheel with hardened chain guides for precise chain pocket wheel fit.
• Up to 3 ton capacities for heavy duty industrial applications.
• H-4 Duty standard.
• Rugged NEMA 4 pushbutton station.
• Over-capacity overload protector standard.
• Upper lower screw type limit switches are standard, with back-up reverse plugging limit switch.
• Hardened, forged steel, latch type hook and Hoistalloy load chain for long dependable service.
• Lifetime warranty.
• Each hoist is tested to 125% of rated capacity prior to shipment.
• Meets ASME B30.16
• Made in the U.S.A.

The balanced, integrated, proven design of the Lodestar has made it the most popular electric chain hoist in the industry.

What else can Ergonomic Partners do for your CM chain hoist?

Special applications

1. Harsh environment hoists available for severe duty of plating, galvanizing and wash down applications.
2. Hoists with climbing capability available for temporary rigging or lifting applications — must be used in inverted position only.
3. Hoists with creep control allow precise positioning through field adjustment within the time delay range of .05 sec. to 3 sec.

CM Adjustable frequency drives

1. Adjustable frequency drives offer a 40:1 speed range compared to the typical 3:1 ratio that two-speed hoists motors offer.
2. Frequency drives allow controlled acceleration and deceleration, and with their
   programmable micro-positioning control and inching control, allowing precise positioning and
   eliminating reverse plugging or jogging.
3. These are provided under the hoist cover for hoisting motion.

Ergonomic handle

• Hook mounted control station designed for single chain, one-speed Lodestar and Valustar hoists.
• Aircraft style handle for right or left hand operation.
• Push buttons located at top left and at trigger positions for ease of operation.
• Lightweight but sturdy aluminum frame construction.
• Easy installation on most small frame electric chain hoists.
• One-year warranty on the handle.
• Made in U.S.A.
  
  
  

Hoist and chain safety kits
These useful inspection kits make it easy to understand and comply with OSHA and ANSI/ASME regulations for chain hoist and chain sling use and inspection.

• Hoist kit covers inspection of lever tools, pullers and chain hoists.
• Chain kit discusses chain and chain sling care and use.
• Both kits provide survey information to allow for complete inspection of hoists and/or chain throughout a plant.
• Instructions and tips are completely illustrated and easy to follow.
• OSHA compliance information included

Lodestar Metal Chain Container

• Convenient for slack chain storage
• Simple one pin attachment for easy installation
• Security cable included
• Available for every Lodestar and Valustar model
• Made in U.S.A.

Lodestar Fabric Chain Bag
CM's chain bags offer an alternative to the standard metal chain container for use with Lodestar or Valustar electric chain hoists. Chain bags are made from an open weave vinyl coated polyester designed especially for extended outdoor life. Not recommended for applications over 300 degrees F, in extremely caustic environments or for chain weight exceeding 300 lbs. Features include:

• Flexible and lightweight material
• Excellent resistance to ultraviolet rays, mildew stains, rot and weather
• Abrasion resistant
• No shrinkage
• Made in U.S.A.

Bullard Hooks

• Bullard hooks may be preferred to standard hooks equipped with latches
• Rugged cast swing gate locking member
• Must be ordered separately from hoists
• Hook gate is intended to retain slings and other lifting devices under slack conditions only.
• Gate is not intended to retain the load.

Let your Ergonomic Partners sales representative assist you to pick the correct CM chain hoist for your application.  Please contact Ergonomic Partners today.