Handheld Crane Radio Remote Controls by Magnetek and Telemotive

No matter what your remote control needs are, Magnetek's radio controls can meet them. Ergonomic Partners can help you apply handheld crane radio remote control to your overhead bridge cranes, monorail hoists, motorized jib cranes or other pieces of industrial equipment. Users benefit from increased productivity, enhanced safety and reduced maintenance costs. Our engineers can help your plant personnel choose the best radio for your application.

Flex EX2 Remotes

The Flex EX2 Series of pre-packaged systems provides a standard cost effective solution to the restrictive use of hard-wired cabling.

They are used for controlling remotely operated overhead bridge crane remote controls, mobile hydraulic equipment, and other industrial machinery safely and effectively. These value packed systems are standard, complete crane remote control systems that are available in several hand-held versions. The basic radio remote control system comes complete with the following items: (2) hand-held remote transmitters, (1) pre-wired receiver unit with six feet of cable, operator's user manual, carrying straps and vinyl slip covers.

The crane remote controls come in 4, 6, 8 and 12 button styles to meet all your applications. Indoor or outdoor, the IP66 rated receiver enclosure can provide you the confidence and protection in the harshest environments.

Flex EX2 Radio Remote Control Competitive Advantages
  • 62 available channels, adjustable without changing the printed circuit board
  • These units have auto-scan, so there is no need to change dipswitches on receiver
  • 1 million ID codes
  • Self Adjusting RF, no RF tuning needed
  • Advanced processor controls are all high grade quality
  • Pitch and catch, random access, and tandem functions are standard
  • Removable, durable power key to stop unwanted use
  • Sealed to IP66 specifications, and chemical resistant
  • Full compliance with FCC Part-15 rule
  • Full system compatibility. All systems work with each other, minimizing the need for spare parts
  • 4, 6, 8, or 12 buttons available
  • 2, 3, 4, or 6 motions
  • Two transmitters standard
  • 6 foot pig tail are standard for all systems
Magnetek Flex 4EX2

The Flex 4EX2 series remote control is the smallest hand-held controller for our Flex EX2 line. It is a small rugged unit used for material handling, mobile hydraulic, and industrial applications. This radio remote control unit can be used for indoor or outdoor applications. The small transmitter size is durable with four buttons that are large enough for gloved operators. The buttons can be field setup to be either momentary or maintained functions. The additional features include a latching E-stop switch and removable key switch.

Part Number Description
FLEX-4EX2-09-2T Flex 4EX2 System - Includes one 120VAC receiver and two transmitters with four 2-speed pushbuttons (2-motion, 2-speed with E-stop, On/Off and Start)
Magnetek Flex 6EX2

The Flex 6EX2 series remote control is the mid-size hand-held controller for our Flex EX2 line. It is a rugged unit used for material handling, overhead crane, hydraulic, and industrial applications. The unit can be used for indoor or outdoor applications. The transmitter is durable with six buttons that are large enough for gloved operators. The buttons can be field setup to be either momentary or maintained functions. The additional features include a latching E-stop switch and removable key switch, over 150 field settable functions, pre-wired receiver with 6 foot of cable, arrow and compass directional labels are standard.

Part Number Description
FLEX-6EX2-09-2T Flex 6EX2 System - Includes one 120VAC receiver and two transmitters with six 2-speed pushbuttons (3-motion, 2-speed with E-stop, On/Off and Start)
Magnetek Flex 8EX2 and 12EX2 Radios
Part Number Description
FLEX-8EX2-01-2T Flex 8EX2 System - Includes one 120VAC receiver and two transmitters with eight 2-speed pushbuttons (4-motion, 2-speed with E-stop, On/Off and Start)
FLEX-12EX2-01-2T Flex 12EX2 System - Includes one 120VAC receiver and two transmitters with twelve 2-speed pushbuttons (6-motion, 2-speed with E-stop, Off/On/Start)
Magnetek Flex EX2 A/B Multi-Hoist Radio

The Flex EX2 A/B radio systems allow for one crane operator to select between two trolley/hoists located on a single bridge (A, B or Both) controlling both at same time or each trolley/hoist separately. The systems come in both 3 motion and 5 motion so you could also control an auxiliary hoist. This is a pre-engineered offering, making it extremely competitive in the marketplace.

Part Number Description
FLEX-8EX2-AB-01-2T Flex 8EX2 A/B System - Includes one 120 VAC receiver and two transmitters with seven 2-speed pushbuttons and selector switch. 3-motion, 2-speed, plus 1-Aux, Trolley/Hoist A, B, Both selector switch, E-stop, Off/On/Start
FLEX-12EX2-AB-01-2T Flex 12EX2 A/B System - Includes one 120 VAC receiver and two transmitters with eleven 2-speed pushbuttons and selector switch. 5-motion, 2-speed, plus 1-Aux, Trolley/Hoist A, B, Both selector switch, E-stop, Off/On/Start
Enrange Flex EX2 (RS) Receiver Select or Tandem Operation

The Flex EX2-RS package enables one crane operator to control up to 2 bridges and 4 trolley/hoists at the same time or independently. The tandem system allows two crane operators to control two bridges/cranes or trolley/hoists at the same time or independently.

Part Number Description Get a Quote
FLEX-8EX2-2RS-3M-09-2T Flex 8EX2 RS Receiver Select Package - Includes two 120 VAC receivers and two transmitters with 6 motion buttons and 2 trolly/hoist select buttons. 3-motion, 2-speed, plus E-stop, Off/On/Start Call
314-884-8884
or Email for pricing.
0-FLEX-12EX-4RS-6M Flex 12EX RS Receiver Select Package - Includes four 120 VAC receivers and two transmitters with 6 motion buttons, 4 trolly/hoist select buttons, and 2 bridge select buttons. 6-motion, 2-speed, plus E-stop, Off/On/Start Call
314-884-8884
or Email for pricing.
Magnetek's Flex VUE™ Handheld Remote Control with LCD Display

Magnetek's innovative new Flex VUE™ combines a LCD display with stepless or two-step technology in a lightweight, comfortably contoured handheld transmitter. It's available with several options to meet the needs of a variety of crane, and hoist applications and industries.

Magnetek Flex VUE LCD Display

Superior Communication and Convenience

  • High resolution color LCD display keeps the operator informed of system status and diagnostics at all times, including battery life, signal strength, and warning symbols
  • Quickly and easily configure the transmitter right through the LCD display menu
  • Available two-way RF for applications requiring feedback of machine parameters, alarms, and command confirmation
  • Frequency options include 400MHz and 2.4GHz

Versatility Combines with Precise Control

  • Choose 4, 8 or 12 stepless or two-step technology button configurations with accurate and smooth operation
  • Adjustable speed control – four mode settings (25%, 50%, 75% and 100% output) provide exact control of machine movement
  • Buttons can be configured as proportional, on/off, or a combination of both and include a variety of standard labels
  • Configure the Flex VUE on a PC with the optional Radio Control Programmer
  • Easily upload new programming in the field with USB connection

Durable and Reliable

  • Rugged, super tough nylon housing is made to withstand shock, water, heat, and harsh environments
  • Rated NEMA 4 (IP66), sealed to withstand harsh, industrial environments
  • Designed to minimize power consumption, providing one of the longest life batteries in the industry today
  • Custom labeling, protective cases and accessories available

Comfort and Style in One Package

  • Ergonomically designed contoured case makes it comfortable for the user
  • Designed to be compact and lightweight to prevent operator fatigue
  • One-handed operation frees the operator to assist in other tasks

Radio Drive Serial Interface (RDSI) Option
The RDSI module is designed to communicate via a serial interface to directly control Magnetek's IMPULSE®•G+ Series 4 and VG+ Series 4, IMPULSE®•G+ Series 3 and VG+ Series 3 and IMPULSE®•G+ Mini Adjustable Frequency Crane Controls (consult factory for compatibility if you have an existing RDSI setup with a Series 2 drive). RDSI provides users with diagnostic and troubleshooting information on the ground so there is no need to get up on the crane.

  • Automatically detects drive types
  • Eliminates the need for drive contactors
  • Provides feedback parameters directly from the drive, including Drive Status, Output Frequency, Output Voltage, Output Current, Output Power, and Torque Reference
  • Reduces system costs by eliminating relay cards, excessive wiring and labor

Let Ergonomic Partners help build a Flex VUE™ system to your specifications-with Magnetek's Flex M receiver, it's completely customizable.

Telemotive telePilot Crane Remote Control Highlights
  • Three motions standard, up to 5 motions via A, A&B, B select
  • Single or Two Speed models available
  • Backward compatible to most 10K Telemotive receivers.
Telemotive telePendant Handheld Crane Radio Remote Highlights
  • Available in up to 3 motions with 6 auxiliary functions or 5 motions with 4 auxiliary functions using A&B select.
  • Two or three-speed models available
  • Backward compatible to most 10K Telemotive receivers.
Telemotive telePendant Radio Hoist Remote Control System

Durability, ergonomics, maximum functionality and value are built right into every telePendant™. The lightweight pendant system will meet or exceed your expectations.

Transmitter Features:
  • Rugged, chemically resistant transmitter case withstands shock and abusive environments
  • Traditional pendant-style pushbutton station switches, rated for a million plus operations, available in two- and three-speed designs
  • Ergonomic, lightweight transmitter (50% lighter than its predecessor)
  • All Telemotive products are designed to minimize power consumption, providing one of the longest life batteries in the industry today
  • Electronically synthesized frequency allows for 31 operating channels-no crystals to break
  • Time Multiple Shared feature-four systems can share the same channel without interference
  • 4-in-1 transmitter design supports multiple cranes via password protected access code
  • Compatible with Telemotive's 10K Systems
  • Flexibility in programming means you can customize output configurations, frequency channels, and security code via a Radio Control Programmer with IR Adapter Communication (P/N: RCP-IR)
  • Universal transmitter design eliminates the cost and hassle of tracking and maintaining a fleet of spare transmitter
  • No remote control licensing required.

Telemotive 10K and telePendant pre-engineered systems consist of a pendant-style transmitter, and an inteleSmart receiver.

The telePendant is available in two- and three-speed designs. Durability, ergonomics, maximum functionality and value are built right into every transmitter. We're confident the telePendant system will meet or exceed your expectations.

InteleSmart Receiver Features:

  • Custom output mapping via the USB/IR Adapter (P/N: RCP-IR)
  • Available in 12 to 24 outputs
  • Synthesized RF - up to 31 operating channels
  • Designed for VFD, PLC and contactor controls
  • Compact design minimized space requirements
  • NEMA 4X Enclosure
  • Optional pigtails plug right in, minimizing field wiring
  • Group coding - easily allows transmitter to control multiple cranes in various configurations
Telemotive telePilot remote Control System

Magnetek brings you the most durable hand-held transmitter on the market today, which is available with up to 5 motions and two-speed.

  • Order telePilot preprogrammed from the factory to fit your application, or customize it yourself via the Radio Control Programmer with IR Adapter Communication (P/N: RCP-IR)
  • Ergonomically designed lightweight transmitter
  • 4-in-1 transmitter design supports multiple cranes via a password protected access code
  • Extremely durable extruded aluminum transmitter housing
  • Available in three-motion, two-speed and three-auxiliary functions, or three-motion, two-speed, one auxiliary function, and A, A+, B or B
  • Wireless crane pendant unit designed with sub-voltage technology providing a much longer operating life
  • Switches designed with a rated life of over one million operations

telePilot pre-engineered systems feature the most functional, operator-friendly membrane-style transmitter available today, along with our inteleSmart receiver.

telePilot's ergonomic design is more slender and lightweight than most membrane transmitters, and is packed with features. Yet this is the most durable hand-held transmitter on the market today. The telePilot system will meet or exceed your expectations.

Model Number Description Pricing
Mini telePendant, Two telePendant Transmitters, A/B Select
TPDTSYS12-22FMINI Mini telePendant System-One TR12 Mini inteleSmart Receiver, "Two" telePendant 2-speed, 3 motion transmitters with A/B Select, 2 or 3 Aux. and two AA batteries. Recommended for drives that do not need MOVs. We recommend a pigtail due to the compact size. Call
314-884-8884
or Email for pricing.
Mini telePendant, One telePendant Transmitters, A/B Select
TPDTSYS12-21FMINI Mini telePendant System-One TR12 Mini inteleSmart Receiver, "One" telePendant 2-speed, 3 motion transmitter with A/B Select, 2 or 3 Aux. and two AA batteries. Recommended for drives that do not need MOVs. We recommend a pigtail due to the compact size. Call
314-884-8884
or Email for pricing.
Standard telePendant, One TR12 Receiver, Two telePendant Transmitters, A/B Select
TPDTSYS12-22FSTD Standard telePendant System-One TR12 Standard inteleSmart Receiver with output fusing and MOVs, "Two" telePendant 2-speed, 3 motion transmitters with A/B Select, 2 or 3 Aux. and two AA batteries Call
314-884-8884
or Email for pricing.
Standard telePendant, One TR12 Receiver, One telePendant Transmitters, A/B Select
TPDTSYS12-21FSTD Standard telePendant System-One TR12 Standard inteleSmart Receiver with output fusing and MOVs, "One" telePendant 2-speed, 3 motion transmitter with A/B Select, 2 or 3 Aux. and two AA batteries Call
314-884-8884
or Email for pricing.
Standard telePendant, One TR24 Receiver, Two telePendant Transmitters, A/B Select
TPDTSYS24-32FSTD Standard telePendant System-One TR24 Standard inteleSmart Receiver with output fusing and MOVs, "Two" telePendant 3-speed, 5 motion transmitters with 4 Aux., A/B Select and two AA batteries Call
314-884-8884
or Email for pricing.
Standard telePendant, One TR24 Receiver, One telePendant Transmitters, A/B Select
TPDTSYS24-31FSTD Standard telePendant System-One TR24 Standard inteleSmart Receiver with output fusing and MOVs, "One" telePendant 3-speed, 5 motion transmitter with 4 Aux., A/B Select and two AA batteries Call
314-884-8884
or Email for pricing.
telePendant Radio Control Transmitter
TX12P-2C telePendant Transmitter 2-speed, 3 motion w/ A/B Select and up to 3 Aux. - Required information: Job Number from the original system. Call
314-884-8884
or Email for pricing.
Magnetek inteleSmart Receiver Features
  • Custom output mapping via the USB/IR Adapter
  • Available in 12 to 24 outputs
  • Synthesized RF - up to 31 operating channels
  • Designed for VFD, PLC and contactor controls
  • Compact design minimized space requirements
  • NEMA 4X Enclosure
  • Optional pigtails plug right in, minimizing field wiring
  • Group coding - easily allows transmitter to control multiple cranes in various configurations

Ergonomic Partners sells, services and distributes crane radio remote controls; serving clients from coast to coast, Canada, Mexico and especially focused in the states of Missouri, Illinois, Indiana, Kansas, Arkansas, Mississippi, Nebraska, Tennessee, Kentucky, Iowa, and Oklahoma.